Youin BK5000, User Manual

Page: 30 / 164

30
YOU-RIDE MONT BLANC
05 The throttle has fault 1. Check the connector of throttle whether they are
correctly connected.
2. Disconnect the throttle, If the problem still
occurs, please contact your retailer.
(only with this function)
07 Overvoltage protection 1. Remove the battery.
2. Re-Insert the battery.
3. If the problem persists, please contact your
retailer.
08 Error with the hall sensor
signal inside the motor
Please contact your retailer.
09 Error with the Engine phase’s Please contact your retailer.
10 The temperature inside
the engine has reached its
maximum protection value
1. Turn off the system and allow the Pedelec to cool
down.
2. If the problem persists, please contact your
retailer.
11 The temperature sensor
inside the motor has an error
Please contact your retailer.
12 Error with the current sensor
in the controller
Please contact your retailer.
13 Error with the temperature
sensor inside of the battery
Please contact your retailer.
14 The protection temperature
inside the controller has
reached its maximum
protection value
1. Turn off the system and let the pedelec cool
down.
2. If the problem persists, please contact your
retailer.
15 Error with the temperature
sensor inside the controller
Please contact your retailer.
21 Speed sensor Error 1. Restart the system
2. Check that the magnet attached to the spoke is
aligned with the speed sensor and that the distance
is between 10 mm and 20 mm.
3. Check that the speed sensor connector is
connected correctly.
4. If the error persists, please contact your retailer.
25 Torque signal Error 1. Check that all connections are connected
correctly.
2. If the error persists, please contact your retailer.
26 Speed signal of the torque
sensor has an error
1.Check the connector from the speed sensor to
make sure it is connected correctly.
2.Check the speed sensor for signs of damage.
3.If the problem persists, please contact your
retailer.
27 Overcurrent from controller Please contact your retailer.
8. LCD Display