6
Step# 5
1) Slide Side Panels (L) downward between
Corner Panels (K).
2) Assemble the two pieces of the Support
Tube Rim (P) together.
3) Put the assembled Support Tube Rims (P)
in the right place as the picture shows.
Step# 6
Place Sand Bag (N) in the umbrella
base as the picture shows.
Step# 7
1) Pull open the Velcro pouch to allow sand to be filled. For proper stability of your offset
umbrella, the minimum weight of the sand to be placed into each sand bag is 110lbs
for a
total of 220lbs
.
2) After filling with sand only, close the pouch and insure the Velcro is sealed. Lock the
two sections of Sand Bag (N) together.
