Yotobike Leopard-Fat, Owner'S Manual

Page: 15 / 39

◆
Pedals Installation (15mm Wrench)
Make sure your pedals are installed on the correct side, as installing on the wrong side will damage the threads. Indicators for the right pedal ( R) and the left can
be found in two places: the stickers on the plastic cover, and the bottom of the pedal threads.
Before you install the pedals, apply a small amount of waterproof grease onto the spindle. Start threading the pedal on by hand to ensure the pedal is going in
perfectly straight, rotating in the direction of the pointer shown on the crank. If it is not spinning smoothly, make doubly sure that you have each pedal on the correct
side. After initial hand-tightening, fi nish tightening the pedals with a standard 15 mm wrench .
13