-16
-
■EPDT-292■
8.4.3
Assembly method (See Fig. 8)
*Tools used
Name of tool
Details (size, nominal size, etc.)
Torque wrench
Any of those that can apply 50, 70, 100, 140 N•m torque
(Use hex socket)
Spanner torque
wrench
Width across flats of wrench: 24 mm, any of those that
can apply 50 N•m torque
Width across flats of wrench: 41 mm, any of those that
can apply 140 N•m torque
Spanner
Width across flats: 24 mm
Hex socket wrench
Width across flats: 19 mm, 32 mm
Procedure 1: Apply lubricant oil (machine oil) to new gasket [7], let it into vent valve seat
[5], and put it into cover [2] by hand.
Procedure 2: Switch vent valve P [4] as below.
Procedure 3: Put vent valve of vent valve P [4] into vent valve seat [5]. Then, place vent
valve P [4] at the position of pin (2 parts) of cover [2].
Vent valve P [4]
Gasket [7]
Vent valve
Vent valve seat [5]
Cover [2]
Pin (2 parts)
