-5-
■EPDT-310■
Minimum maintenance space for disassembly
6. Operating procedure
6.1 Warning and caution for operation
Warning
1. Do not touch the product with bare hands in case of high temperature fluid.
* Failure to follow this notice may scald your skin.
2. Before letting fluid flow, be sure to check that there is no danger if fluid flows to end of piping, the
product is connected firmly, and pilot pressure piping is connected firmly to pilot port.
* Failure to follow this notice may contaminate the surroundings. Also, fluid with high temperature may
scald your skin.
Caution
1. Before leading fluid into the product, close the stop valves at the inlet and outlet of the product and
remove foreign substances and scale from the piping completely by using a bypass line.
* Failure to follow this notice may prevent the product from functioning properly due to the ingress of
foreign substances and scale into the product. Also, foreign substance stuck inside the product leads
to malfunction.
2. Open each stop valve in the piping to avoid water hammer or condensate obstruction when leading
fluid to the product.
* Rapid opening of stop valve may break the product or peripheral equipment by water hammer or
condensate obstruction.
3. If fluid leakage from piping connection part of the product is found after leading fluid to the product,
stop the fluid immediately and discharge inner pressure of the product, piping and peripheral equipment,
and retighten piping connection (for fluid with high temperature, after cooling the product).
* Failure to follow this notice may result in making the surroundings dirty. Also, fluid with high
temperature may scald your skin.
(mm)
Size
H
1
L
2
15A
200
200
20A
210
210
25A
220
220
32A
280
280
40A
290
290
50A
310
310
Fig. 5
