Removal
Installation
1. Install (No. 3)
HB025024-C,
fender eliminator
light to (No. 1)
13300-FEBKT-A,
fender
eliminator light bracket.
2. Install (No. 1)
13300-FEBKT-A,
fender eliminator
light bracket and (No. 2)
13300-FEBKT-B,
license plate bracket to frame using the two
stock fender bolts and washers.
3. Install stock left and right turn signals onto
(No. 5,6)
13300-TSB-L/R,
turn signal brackets.
4. Install (No. 5,6)
13300-TSB-L/R,
left and right
turn signal brackets and (No. 4)
070BG-LPF
,
license plate frame using the (No. 7,8)
M6X18BHS
and
M6X16BHS
, 6mm button head
screws as shown.
5. Re-connect tail light and turn signal connectors.
6. Re-install tail using the stock bolts.
7. Re-install rider seat.
8. Check for proper function of license plate light
and turn signals and that all brackets and
components are secure prior to riding.
3
1. Remove rider seat.
2. Remove tail by removing the two bolts securing
tail to frame from above.
3. Locate and disconnect the tail light and turn
signal connectors.
4. While securely supporting the stock fender
assembly, remove the four bolts securing the
fender assembly to frame. Carefully remove the
stock fender assembly making sure not to
damage the connectors in the process.
5. Disassemble the stock fender assembly and
remove left and right turn signals from fender
assembly.
5
10
9
6
4
8
7
1
3
2
1
