c) Making sure that the stripped ends are
centered, heat the center of the butt
connector evenly until the solder begins
to liquify.
d) Allow to cool completely and tug both
ends of the wires to verify that connection
is secured.
Scan for link to butt connector instruction video.
6. Install stock left and right turn signals onto
(No. 5,6)
13630-TSBL/R-00
, turn signal
brackets.
7. Install (No. 5,6)
13630-TSBL/R-00
, turn signal
brackets and (No. 4)
070BG-LPF
, license plate
frame using the (No. 9,10)
M6X16BHS
and
M6X14BHS,
6mm button head screws as
shown below.
8. Route wires between the stock key hole cover
and (No. 1)
13100-FEBKT
, fender eliminator
bracket and under the seat.
9. Reconnect left and right turn signal and license
plate light wires.
10. Re-install seat.
11. Check for proper function of license plate light,
turn signals, brake light, and that all brackets
and components are secure prior to riding.
4
4
5
6
13
12
10
9
