c) Making sure that the stripped ends are
centered, heat the center of the connector
evenly until the solder begins to liquify.
d) Allow to cool completely and tug both
ends of the wires to verify that connection
is secured.
Scan for link to solder shrink connector
instruction video.
7. Route license plate light wire and turn signal
wires along the left side of (No. 1)
12310-
FEBKT,
fender eliminator bracket and through
undertail. Re-connect license plate light and turn
signal connectors.
Note: Using the cable tie supplied in the kit,
secure wires along left side of fender
eliminator bracket.
8. Re-install passenger seat.
9. Check for proper function of license plate light
and that all brackets and components are
secure prior to riding.
4
