background image

IMPORTANT SAFETY INSTRUCTIONS

1.

Read these instructions – All the safety and operating instructions should be read before this product is operated.   

2.

Keep these instructions – The safety and operating instructions should be retained for future reference.   

3.

Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.   

4.

Follow all instructions – All operating and use instructions should be followed.   

5.

Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a 
wet basement or near a swimming pool, and the like. 

6.

Clean only with dry cloth. 

7.

Do not block any ventilation openings. Install in accordance with the manufacture’s instructions. 

8.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) 
that produce heat.   

9.

Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider 
than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is 
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the 
obsolete outlet. 

10. 

Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the 
point where they exit from the apparatus. 

11.

Only use attachments/accessories specified by the manufacturer. 

12.

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with 
the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus 
combination to avoid injury from tip-over. 

13.

Unplug the apparatus during lightning storms or when unused for long periods of time. 

14.

Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, 
such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has 
been exposed to rain or moisture, does not operate normally, or has been dropped. 

15.

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus 

shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on 
apparatus. 

16.

WARNING: The mains plug is used as disconnect device, the disconnect device shall remain readily operable 

17.

  Correct Disposal of this product. This marking indicates that this product should not be disposed with other 

household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled 
waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used 
device, please use the return and collection systems or contact the retailer where the product was purchased. They 
can take this product for environmental safe recycling. 

18

.

Voltage selector: Used to adjust the input rating (110-120 Vac 50/60 Hz and 220-240 Vac 50/60 Hz), please just 

insert the mains power plug into the socket-outlet with voltage within the setting of the selector. The current ratings of 
mains fuse links are different for different input rating (see marking for details), and the fitted mains fuse link was just 
related to the input rating as setting of the selector during factory assembly line work, please ask a qualified 
personnel to help you replace the mains fuse link before you adjust the voltage selector.   

Summary of Contents for YS1089















Reviews: