2
the Level control on each
cabinet sets the volume
for that cabinet. When
used with a microphone
connected to one NX25P
at the beginning of the
chain the Level control
will normally be set to
maximum unless it is
desired that a particular
cabinet be set quieter
than the rest. When a
line source is used the
Level control will set the
volume for the enclosure.
If there are multiple NX25P
enclosures in a system, it
will be necessary to set
the Levels separately. If
using a mixer for the line
source, the mixer should
control the level of all the
NX25P enclosures. (When
a mixer drives the NX25P
enclosures, the Level control should be set
to maximum). If there are multiple NX25P
enclosures it may be desirable to set the level
control of individual enclosures to less than
maximum (if it’s desirable for that enclosure to
be quieter).
Treble, Mid and Bass Controls
These controls affect all the sound coming out
of a particular NX25P enclosure. These controls
do not affect the sound at the Mix Out. In a
system with multiple cabinets
it will be necessary to adjust
the bass, Treble, Mid and
Bass controls on all individual
enclosures.
Signal / Limit LED
This dual LED illuminates
green when signal is present
and red when limiting.
Shield Switch
The Shield switch disconnects
the ground connection on
the Line In. This may help
prevent hum or buzz under
some circumstances.
Power LED and
Switch
The Power Switch turns the
power on and off for the
NX25P enclosure, the green
LED will illuminate when
the power is on also indicating a properly
functioning fuse.
Voltage Selector Switch
Select the proper voltage for the
geographical region in which the NX25P
will be used. The unit is set for 115V when
used with the standard North American line
voltage. For European operation set the unit
to 230V. If in doubt of the line voltage please
contact your local Yorkville dealer.
POWER
ON
OFF
LINE IN
MIC IN
MIX OUT
LEVEL
0
00
dB
BASS
6
6
dB
MID
6
6
dB
TREBLE
6
6
dB
MIC GAIN
max
min
SIGNAL / LIMIT
POWER
SHIELD
P
25
1
3
2
1
3
2
2
3
1
200 WATT POWERED LOUDSPEAKER ENCLOSURE
MIC IN
MIC GAIN
LEVEL
LINE IN
MIX OUT
180 WATTS
TONE CONTROLS
20 WATTS
Bass MidTreble
Shield
30hz/5kHz
5kHz
Summary of Contents for NX25P Series Two
Page 12: ...10 ...
