1. Channel 1&2 Inputs
The combi-jacks are optimized
for mics (XLR) or a balanced line
level (1/4-inch) source on channel
1 or instrument level on channel 2.
For condenser mics, 12V of phantom power is
present on the XLR portion of the jack.
2. Channel 3 Input
Equipped with an XLR jack (optimized for
mics, an unbalanced TRS 1/8-inch phone jack
(or portable media players) and Bluetooth™.
For condenser mics, 12V of phantom power is
present on the XLR portion of the jack.
Note: When Bluetooth™ is used the volume
is controlled by Channel 3’s Level control.
3. Bluetooth™
The Yorkville EXM Mobile is capable of receiving
streaming audio over Bluetooth™ from devices
such as smart phones, tablets and laptops.
Pairing:
For ‘Pairing’ depress the Pairing
Button for 4 seconds and then release.
Status:
Slow blinking indicates pairing
mode while fast blinking indicates an avail-
able, unpaired connection. A steady (solid)
blue light indicates it’s paired and audio is
available to Channel 3.
Note: When connected with Blue-
tooth™, ALL audio is streamed from
your device. If you don’t want your
streaming music to be interrupted,
turn off ‘notifications’ on your device.
4. Channel Level Controls
Use this control to adjust the channel’s level in
the overall system mix.
5. Channel Shape Controls
Setting towards ‘Music’ shapes the response for
reproducing prerecorded music while setting
the control towards ‘Speech’ accentuates the
mid-frequencies helping speech and vocals.
The response is flat in the center position.
6. Channel Effects Controls
This control determines how much of the selected
effect is applied to the corresponding channel.
7. Master Control
The Master Control is used to set the overall
level of the Yorkville EXM Mobile.
8. Effects Selector
Three effects are available as well as an off
(no-effects) position. The effects are Delay,
Hall Reverb and Room Reverb. The selected
effect is available to all 3 input channels, the
amount of effect applied is controlled by the
individual channel’s effects knob.
Note: If effects are not in use, set this
switch to the off position to help con-
serve battery life..
9. Link Jacks
To use the Link feature, insert a standard
XLR patch cable between cabinets. Then
EXM Mobile cabinets are linked, ALL mixer
inputs are sent to ALL speakers.
10. Battery Status Indicators
The status LEDs (green, green, yellow, and red)
indicate the approximate charge level. The upper
green LED is illuminated if there’s greater than
85% charge. The red LED begins to blink if the
battery is critically low (approx. 10% remaining).
The indicators will be en-
gaged only when the power
switch is turned on.
11. Low-Power
“Sleep” State
To preserve battery life, the unit is
equipped with “sleep” modes. These modes
are automatic and nearly undetectable when
configured properly. To ensure the sleep states
do not interfere with normal operation, the EXM
Mobile should be set up with channel gains set
as high as possible (just below clipping) and the
output level should be set with the Master control.
12. Charging Indicator
When AC is connected to the unit, the
charging indicator will be turned on. If it’s
green, the unit is fully charged. If it’s red, the
unit is in the process of charging.
13. Charging the EXM Mobile
To charge the EXM Mobile, plug it into an AC
power source using the included power cord.
The charging indicator LED displays the status;
even if all of the status LEDs are lit, there is still
possibly additional charging time required.
The EXM Mobile can be safely left
connected to AC power for charging
indefinitely. It will intelligently control its own
charging regime when plugged in long-term.
If the EXM Mobile is going to be unused for
longer than one month, it is advisable to period-
ically plug it in to charge up the battery. If stored
for a long period unused and not maintained, it
is advisable to connect the charger and leave it
plugged in for approximately 24 hours.
The EXM Mobile will not charge when the
temperature is below 0
°
C or above 45
°
C.
Printed In CANADA
QuickStart-EXMMobile-00-2v3 • YS#QSTART-MOBILE • January 20 2021
To get the full Owner’s Manual please visit our website at
http://www.yorkville.com/manuals/
or, if you need a printed version call
905-837-8777
THIS UNIT CA
N
BE OPERA
TED
WHILE CHARGING!
Mic /
Instrument
Mic/Line
Min
Max
Min
Max
Min
Max
L E V E L
SHAPE
EFFECTS
SHAPE
EFFECTS
SHAPE
EFFECTS
I N P U T S
Clip
Clip
Clip
1
2
3
Mic
Aux In
3
Pairing:
Hold for 4 seconds
- +
- +
- +
Mic
Music Speech
Music Speech
Music Speech
Off
Room
Hall
Delay
EFFECTS
Min
Max
MASTER
MAIN
Input
MAIN
Output
To LINK, Connect
the MAIN Output
to the MAIN Input
of another powered
speaker cabinet
Bluetooth
TM
EXM Mobile
EXM EXM Mobile12
10
7
6
8
9
1
3
2
4
5
The EXM Mobile is delivered with 40-50% of
the charge capacity. Please charge your unit for
5-hours prior to initial battery operation!