Multiple
LS200P
's
As well as accommodating the full-range speakers, the parallel input jacks allow many
LS200P's to be connected in a string. There is no practical limit to the number of LS200P's that
may be connected together.
User Note
For normal operation connect the LS200P just like any ordinary speaker along with the full-range
speakers. The input level switch should be set to speaker. If the audio source does not have a
U ground (a ground pin on the AC cord), the ground lift switch must be set to gnd. The LS200P
may be wired before or after the full-range speakers. The LS200P does not alter the signal to the
full-range speakers. The LS200P will not draw any power from the amplifier driving the full-range
speakers. Please note that an external crossover is not necessary.
Figure 2
Full Range
Cabinet
Full Range
Cabinet
LS200P
SUBWOOFER
LS200P
SUBWOOFER
Power Amplifier
Figure 3
Full Range
Cabinet
Mixer
Full Range
Cabinet
LS200P
SUBWOOFER
LS200P
SUBWOOFER
Line Out
Line Out
Amplifier
Amp Out
Amp In
Amp Out
Amp In
Line Out
