York YLCC-102, Technical Information

Page: 8 / 84

8
6 (x2) 30 .5 3 (x2) 8 38 47 50 6
22 (x2) 35 3 4.6 (x2) 29 53 69 80 25
27 (x2) 75 4 6.4 (x2) 33 66 83 00 35
35 (x2) 25 4 7.4 (x2) 46 84 5 25 50
24 (x2) 35 5.5 0.3 (x2) 66 6 35 60 70
27 (x2) 75 5.5 (x2) 7 30 63 200 95
DB air intake temperature to coil Water outlet temperature
Temperature differ-
ential between water
discharge and intake
YLCC 342 436 0 - 46 - 5* - 5 - 3 7
YLCC-H
342 436 0 -0 46 20 5* 30 5 50 3 7
Nominal at 400 V
Minimum °C Máximo °C Minimum °C Máximo °C
Operating cycle Operating cycle
* At water temperatures below the nominal limits, it is always necessary to use glycol-type antifreeze mixtures.
Voltage limits
Model
Minimum Máximo Cool Heat Cool Heat Cool Heat Cool Heat
Máximo
°C
Minimum
°C
Nominal
water
flow l/h
Model
YLCC-42 6 760 6. 3 268 50
YLCC-62
020 43.5 20 22 50
YLCC-82 2 285 57 23 304 50
YLCC-102
6 424 94 28 834 50
YLCC-122 9 404 20.4 33 247 50
YLCC-152
22 948 45.6 38 32 50
Pressure
drop
Kpa
Nominal
air flow
m 2 /s
Available
pressure,
fan, Pa
Nominal water
flow l/h
Model
YLCC-H-42 7 07 6 829 6.4 3 268 50
YLCC-H-62 0 04 0 045 36.6 20 22 50
YLCC-H-82
2 2 3 629 56.6 23 304 50
YLCC-H-102 6 65 6 03 9 28 834 50
YLCC-H-122
7 977 8 889 7.5 37 403 50
YLCC-H-152 22 085 20 80 42.3 37 403 50
Pressure
drop
Kpa
Nominal
air flow
m
2
/s
Available
pressure,
fan, Pa
Frío Calor
Start
intensity
Model
Power
supply
Compressor
Operating
nom. intensity
kW
Nominal
amps
Outdoor fan motor
Total
nominal
intensity
(unit)
Automatic
switch
(K curve),
amps
Total nominal
Minimum
section of
cables mm 2
kW
400.3.50
400.3.50
400.3.50
400.3.50
400.3.50
400.3.50
Total max.
intensity
(unit)
YLCC-42 /
YLCC-H-42
YLCC-62 /
YLCC-H-62
YLCC-82 /
YLCC-H-82
YLCC-102 /
YLCC-H-102
YLCC-122 /
YLCC-H-122
YLCC-152
/YLCC-H-152
DB WB
Summer 35 24 2 7
Winter 7 6 40 45
Outdoor air
temperature °C
Water
intake tem-
perature °C
Water
discharge
temp. °C
Voltage
400 V
Limits of use
Limits of use, YLCC
(cool only unit)
Water discharge temperature: +6° C to +5° C.
Brine discharge temperature: -5° C to +6° C.
Temperature difference in heat exchanger: 3 to 7° C.
Maximum air intake temperature: +46° C.
Minimum ambient temperature: +0° C (standard), -8° C
low ambient temperature kit (optional).
Limits of use, YLCC-H
(heat pump unit)
Cool mode
Water discharge temperature: +6° C to +5° C.
Brine discharge temperature: -5° C to +6° C.
Temperature difference in heat exchanger: 3 to 7° C.
Maximum air intake temperature: +46° C.
Minimum ambient temperature: +0° C (standard), -8° C
low ambient temperature kit (optional).
Heat mode
Water discharge temperature: +30° C to +50° C.
Ambient temperature: -0° C to +20° C.
Temperature difference in heat exchanger: 3 to 7° C.
Minimum air intake temperature: 0° C with maximum dis-
charge water temperature of 50° C.
Minimum air intake temperature: -5° C with maximum dis-
charge water temperature of 45° C.
Test conditions
Nominal flows, cool only
The cooling capacities on the corresponding tables are valid
for the following nominal flows:
Nominal flows, heat pump
The capacities on the corresponding tables are valid for the
following nominal flows:
Electrical characteristics