FORM 160.87-OM1
ISSUE DATE: 8/24/2018
JOHNSON CONTROLS
146
SECTION 2 - OPTIVIEW CONTROL CENTER INTRODUCTION
OVERVIEW
This screen allows up to 10 Service Technician select-
ed parameters to be displayed. These parameters are
selected from a list on the CUSTOM VIEW SETUP
Screen. This allows the Service Technician to display
parameters pertinent to a particular problem during
troubleshooting. At completion of the service call, the
display can be cleared or the parameters can be left
there for monitoring by operations personnel.
DISPLAY ONLY
None
Requires a login access level of SERVICE.
PROGRAMMABLE
Print
Access Level Required: VIEW
This generates a listing of the parameters displayed on
this screen.
NAVIGATION
Home
Access Level Required: VIEW
Returns user to HOME Screen.
History
Access Level Required: VIEW
Returns user to HISTORY Screen.
Setup
Access Level Required: OPERATOR
Causes a jump to the subscreen that allows selection of
the parameters to be displayed.
CUSTOM VIEW SCREEN
00324VIP
FIGURE 62 -
CUSTOM VIEW SCREEN
