8
P01432Q-rev.1
3.4 Necessary Tools and Instrument List for Installation
3.3 Factory-Supplied Accessories
Check to ensure that the following accessories are packed with the indoor unit.
The screws, washers and flare nuts are packed in the pipe insulation.
NOTE:
Use tools and measuring
instruments (vacuum pump, gas
hose, charging cylinder, manifold
gauge) exclusively for refrigerant
R410A.
No.
Tool
No.
Tool
1
Handsaw
11
Torque Wrench
2
Phillips Screwdriver
12
Charging Cylinder
3
Vacuum Pump
13
Manifold Gauge
4
Refrigerant Gas Hose
14
Wire Cutter
5
Megohmmeter
15
Gas Leak Detector
6
Copper Pipe Bender
16
Level
7
Manual Water Pump
17
Crimper for Solderless Terminals
8
Copper Tube Cutter
18
Hoist (for Indoor Unit)
9
Brazing Kit
19
Ammeter
10
Hexagonal Wrench
20
Voltage Meter
NOTICE
The controller and branch piping are optional accessories which are not included with the indoor unit.
If necessary, please contact your contractor.
Accessory
Purpose
Washer (M10)
Hose Clamp
Qty.
8
1
For Unit Suspension
For Condensate Pipe Connection
Condensate Hose
1
For Condensate Pipe Connection
Vibration-proof
Rubber
8
For Unit Suspension
Cable Band
5
PVC Tube
2
For Securing PVC Tube
Cable Band
8
For Securing Pipe Insulation
For Separating Communication Cables and
Wired Controller Wirings from Power Supply Wirings
ID 1/2 inch (12mm)
Pipe Insulation
1
For Refrigerant Liquid Piping Connection
ID 1 inch (26mm)
1
For Refrigerant Gas Piping Connection
ID 1-1/8 inches (28mm)
