Read this manual carefully before using this air-conditioner. If you still have any
difficulties or problems, consult your dealer for help.
The air-conditioner is designed to provide you with comfortable room conditions. Use
this unit only for its intended purpose as described in this instruction manual.
We recommend that this air-conditioner is installed properly by qualified installation technicians in
accordance
with the installation instructions provided with the unit.
Before installation, check if the voltage of the power supply at installation site is the same as the voltage
shown on the nameplate.
You must not carry on any transformation to this product, otherwise, it may possibly
cause such consequences as water leakage, breakdown, short-circuit, electric
shock, fire, etc.
The work such as piping welding, etc. should be carried out far away from flammable
explosive material vessels, including the air-conditioner refrigerant, to guarantee the
security of the site.
To protect the air-conditioner from heavy corrosion, avoid installing the outdoor unit
where salty seawater can splash directly onto it or in sulphurous air near a spa. Do
not install the air-conditioner where excessively high heat-generating objects are
placed.
Never use gasoline or other inflammable gas near the air-conditioner, which is very
dangerous.
When the air conditioner operation is abnormal, such as burnt smell, deformation,
fire,smoke, etc., it is forbidden to continue using the air conditioner, the main power
switch the of air conditioner must be cut off immediately and the agent must be
contacted.
If the supply cord is damaged, it must be replaced by the factory or its service
department in case of danger.
The place where this product is installed must have the reliable electrical earth facility
and protections. Please do not connect the grounding of this product to various kinds of
air-feeding ducts, drain piping, lightning protection facility as well as other piping lines to
avoid receiving an electric shock and damages caused by other factors.
Wiring must be done by a qualified electrician. All the wiring must comply with the local
electrical codes.
Consider the capacity of the electric current of your electrical meter and socket before
installation.
The power wire where this product is installed is supposed to have the independent
leakage protective device and the electric current over-load protection device which are
provided for this product.
The appliance is not to be used by persons who lack of experience and knowledge,
unless they have been given supervision or instruction. Children should be supervised
not to play with the appliance.
Means for disconnection, which can provide full disconnection in all poles, must be
incorporated in the fixed wiring in accordance with the wiring rules.
Do not turn the air-conditioner on and off from the power main switch. Use the
ON/OFF operation button.
Do not stick anything into the air inlet and air outlet of both the indoor and outdoor
units. This is dangerous because the fan is rotating at a high speed.
Caution Statements
2
DANGER
WARNING
WARNING
CAUTION
