1
5
Operation guide
Replacement of batteries in remote controller
General operation
1. After powered on, press ON/OFF button, the unit will start
2. Press MODE button, select desired running mode.
3. Pr or - button, to set the desired temperature (It is
4. Pressing FAN button, set fan speed, can select AUTO FAN,
5. Pressing and button, to select the swing.
to run. (Note: When it is powered on, the guide louver of
main unit will close automatically.)
unnecessary to set the temp. at AUTO mode.)
LOW, MEDIUM-LOW, MEDIUM, MEDIUM-HIGH and HIGH.
Optional operation
1. Press SLEEP button, to set sleep.
2. Press TIMER ON and TIMER OFF button, can set the
3. Press LIGHT button, to control the on and off of the
scheduled timer on or timer off.
displaying part of the unit (This function may be not
available for some units).
4. Press TURBO button, can realize the ON and OFF of
TURBO function.
1. Press the back side of remote controller marked
the cover of battery box along the arrow direction.
2. Replace two 7# (AAA 1.5V) dry batteries, and
make sure the position of "+" polar and "-" polar
are correct.
3. Reinstall the cover of battery box.
battery
Cover of battery box
remove
reinstall
NOTICE
Ɣ'XULQJRSHUDWLRQSRLQWWKHUHPRWHFR
ntrol signal sender at the receiving
window on indoor unit.
Ɣ7KHGLVWDQFHEHWZHHQVLJQDOVHQGHU
and receiving window should be no
Ɣ6LJQDOPD\EHLQWHUIHUHGHDVLO\LQWKH
room where there is fluorescent lamp
more than 8m, and there should be no obstacles between them.
or wireless telephone; remote controller should be close to indoor unit during
operation.
Ɣ5HSODFHQHZEDWWHULHVRIWKHVDPHPRGHOZKHQUHSODFHPHQWLVUHTXLUHG
Ɣ:KHQ\RXGRQ¶WXVHUHPRWHFRQWUROOHUIRUDORQJWLPHSOHDVHWDNHRXWWKH
batteries.
Ɣ,IWKHGLVSOD\RQUHPRWHFRQWUROOHULVIX]]\RUWKHUH¶VQRGLVSOD\SOHDVH
replace batteries.
5
1
2
3
4
1
2
3
4
