Version
Installation
For installation,follow the instructions set out below:
Remove the external casing,unscrewing the screws which secure it
to the structure,as following indicated.(Refer to Chart 4)
Mark out the fixing points on the wall,either by marking through the drillings in the unit
itself,or by referring to the measurements given in Table 2.
Secure the unit by driving the four fixing screws into suitable masonry plugs.(Refer to
Chart 5)
Chart 4
Chart 5
Chart 6
Connecting point of
refrigerant pipe
(Liquid side
A)
Connecting point of
refrigerant pipe
(Gas side
B)
5
