York YCAL0043E Series, Installation Operation & Maintenance

Page: 52 / 184

YORK INTERNATIONAL
52
FORM 150.62-NM7 (103)
NOTE:
Placement on a level surface of free of obstructions (including snow, for winter operation) or air circulation ensures rated performance, reli-
able operation, and ease of maintenance. Site restrictions may compromise minimum clearances indicated below, resulting in un pre dict able
airfl ow patterns and possible diminished performance. YORK’s unit controls will optimize operation without nuisance high-pres sure safety
cutouts; however, the system designer must consider potential performance degradation. Access to the unit control center assumes the unit
is no higher than on spring isolators. Recommended minimum clearances: Side to wall – 2m; rear to wall – 2m; control panel to end wall
– 1.2m; top – no obstructions allowed; distance between adjacent units – 3m. No more than one adjacent wall may be higher than the
unit.
DIMENSIONS - YCAL0117-YCAL0173 (SI)
LD08764
(2) 64,51,38 CONDUIT K.O.'S (2) 64,51,38 CONDUIT K.O.'S
(8) 13 CONDUIT K.O.'S (8) 13 CONDUIT K.O.'S
(5) 13 CONDUIT K.O.'S (5) 13 CONDUIT K.O.'S
333
CONNECTION)
UNIT TO COOLER
44 (EDGE OF
VIEW A-A
2045
B B
VIEW B-B
POWER ENTRY POWER ENTRY
98 98
CONTROL ENTRY CONTROL ENTRY
51 51
321 321
127 127
127 127
76 76
76 76
76 76
38 38
38 38
25 TYP. 25 TYP.
102 102
NOTE:
All dimensions are in mm unless speci Þ ed oth er wise.
Installation