5
ENGLISH
EN
MANUAL OPERATION
1
Open and lift the front panel up to an angle until it remains xed
with a clicking sound.
2
Push the button until the AUTO indicator is lit, the unit will work in
forced AUTO mode. (the default setting temperature is 24 C)
3
Close the panel rmly to its original position.
• Once you push the manual button, the operation mode is shifted in
an order as: AUTO, COOL, OFF.
• Push the manual button until the operation indicator ashes rapidly
( ve times per second), the unit now operating in forced COOL mode.
This is used for testing purposes only. On forced COOL mode, the
remote operation function is unavailable.
• When the OPERATION indicator goes o , the air conditioner is
OFF.
• To restore the remote controller operation, use the remote controller
directly.
Manual operation can be used temporarily in case you can not nd the remote controller or its batteries are exhausted.
operation suppression zone
2 hours
Set temperature
1 hours
ECONOMIC Operation
operation
starts
1
2
Cooling
Cooling
Time
DRYING operation
Room
temperature
set temperature
Cooling
Fan only
Fan only
HOW THE AIR CONDITIONER WORKS
AUTOMATIC OPERATION
• When you set the air conditioner in AUTO mode, it will automatically
select cooling, heating (cooling/heating models only), or fan only
operation depending on what temperature you have selected and
the room temperature.
• The air conditioner will control room temperature automatically round
the temperature point set by you.
• If the AUTO mode is uncomfortable, you can select desired conditions
manually.
ECONOMIC OPERATION
When you push SLEEP button during cooling, heating (cooling only
type without), or AUTO operation, the air conditioner will start following
operation. The fan speed will be automatically controlled. In the
operation suppression zone where capacity is kept to the minimum,
overcooling is prevented by raising the temperature setting by 1°C after
1 hour and by 2°C after 2 hours of operation. The room temperature
is thus regulated between the operation suppression zone and the set
temperature. (It depends on the outdoor temperature.)
DRYING OPERATION
• The dry mode will automatically select the drying operation based
on the di erence between the set temperature and the actual room
temperature.
• The temperature is regulated while dehumidifying by repeating turning
on and o of the cooling operation or fan only. The fan speed indicator
will display AUTO and low speed will be used.
Manual control button
Manual control button
CAUTIONS
o
