ENGLISH
8
C
B
9
A
6
2
4
3
1
6
2
4
3
1
10
2
4
1
3
5
5
6
A1 Unit
INDOOR UNIT
B Unit
Mounting screw A
ST3.9x25-C-H
Clip anchor
4.3cm
Installtion plate
>12cm
>17cm
Air filter
Mounting screw B
ST2.9x10-C-H
Remote controller
holder
Remote
controller
Installtion plate
4.3cm
Mounting screw A
ST3.9x25-C-H
Clip anchor
>12cm or m
ore
>17cm
Air filter
Remote
controller
Remote controller
holder
Mounting screw B
ST2.9x10-C-H
ST3.9x25-C-H
Clip anchor
Installtion plate
4.3cm
>12cm
>17cm
Air filter
Mounting screw B
ST2.9x10-C-H
Remote
controller
Remote controller
holder
OUTDOOR UNIT
>60cm
>20cm
>100cm
>100cm
>60
cm
Mounting screw C
ST3.9x10-C-H
Water tray
>20cm
Loop the connective
cable (about 300mm
long)
A2 Unit
Note:
Connect the auxiliary pipe
of the three indoor units to
the stop valves as identi
fi
ed
with their respective matched
numbers A1, A2, and B on the
outdoor unit. After
fi
nishing
connection, the indoor units
must be marked relative
number A1, A2 and B.
Model 27-30
NOTE: At least two of A, B, C aspect are free from
blocking.
The air conditioner can be connected only to a supply
with system impedance no more than 0.26 ohm. In case
necessary please consult your supply authority for system
impedance information.
■
Cautions on remote controller installation
•
Before installation, operate the remote controller to
determine its location in a reception range.
•
Keep the remote controller at least 1 m apart from the
nearest TV set or stereo equipment.
•
Do not install the remote controller in a place exposed
to direct sunlight or close to a heating source, such as a
stove.
•
Note that the positive and negative poles are right
positions when loading batteries.
Model 27-30
Number
Name of part
Q’ty
1
Installation plate
3x1
2
Mounting screw A.
3x8
3
ST3.9x25-C-H Clip anchor
3x8
4
Remote controller
3x1
5
Mounting screw B.
3x2
6
ST2.9x10-C-H Remote controller holder
3x1
7
Seal
3x1
8
Drain elbow
1x1
9
Mounting screw C ST3.9x10-C-H
1x2
10
Water tray
1x1
J287-EN.indd 8
J287-EN.indd 8
07.03.2006 9:30:12 Uhr
07.03.2006 9:30:12 Uhr