ENGLISH
6
OPTIMAL OPERATION
To achieve optimal performance, Please note the following:
•
Adjust the air
ow direction correctly so that it is not directed on people.
•
Adjust the temperature to achieve the highest comfort level. Do not adjust the unit to excessive temperature
levels.
•
Close doors and windows on COOL or HEAT modes, or performance may be reduced.
•
Use TIMER ON button on the remote controller to select a time you want to start your air conditioner.
•
Do not put any object near air inlet or air outlet, as the ef
ciency of the air conditioner may be reduced and the air
conditioner may stop running.
•
Clean the air
lter periodically, otherwise cooling or heating performance may be reduced.
•
Do not operate unit with horizontal louver in closed position.
PREPARATION BEFORE INSTALLATION
•
Before doing any work, check the interior power supply cord and the main breaker capacity are suf
cient and the
installation area is suf
cient and complies with the requirements.
•
Check that the power supply available agrees with name plate voltage.
•
Electrical work, wiring and cables must be in compliance with national and local wiring codes and standard.
•
Do not use the extension cables. In the case extended cables are needed, use the terminal block.
SELECTION OF THE LOCATION
•
Select a place which provides the space around the units as shown in the diagram below.
INDOOR UNIT
OUTDOOR UNIT
•
Do not install in a place that cannot bear the weight of the unit.
CAUTION
Models
07
09
12
18
24
28
30
A
12cm 12cm 12cm 12cm 12cm 12cm 12cm
B
70cm 70cm 70cm 70cm 70cm 70cm 70cm
C
12cm 12cm 12cm 12cm 12cm 12cm 12cm
D
15cm 15cm 15cm 15cm 15cm 15cm 15cm
Models
07
09
12
18
24
28
30
A
30cm 30cm 30cm 30cm 30cm 30cm 30cm
B
200cm 200cm 200cm 200cm 200cm 200cm 200cm
C
60cm 60cm 60cm 60cm 60cm 60cm 60cm
D
30cm 30cm 30cm 30cm 30cm 30cm 30cm
J277-EN.indd 6
26.12.2005 15:15:17 Uhr