TEMP Button
: Press the button to increase the indoor temperature setting.
Z
TEMP Button
M
: Press the button to decrease the indoor temperature setting.
LOCK Button: Push this button to lock all the current settings, push again
to cancel the LOCK function.
Indicators on remote controller
Transmission Indicator
This transmission indicator lights when remote
controller transmits signals to the indoor unit.
Mode display
Displays the current operation mode. Including
AUTO, COOL, DRY, HEAT (Not applicable to
cooling only models), FAN and back to AUTO.
ON/OFF display
Displayed by pressing the ON/OFF button.
Press the ON/OFF button again to remove.
Temp./Timer display
Displays the temperature setting (17°C to 30°C or
timer setting (0~24h). When you set the operat-
ing mode to FAN ONLY, no temperature setting
is displayed.
TIMER display
This display area shows the settings of the
TIMER. That is, if only the starting time of opera-
tion is set, it will display TIMER ON.
If only the turning off time of operation is set, it
will display TIMER OFF. If both operations are
set, it will show TIMER ON OFF which indicates
you have chosen to set both the starting time
and off time.
Fan speed display
Displays the selected fan speed: HIGH, MED,
LOW. Nothing displays when the operating mode
is either AUTO or DRY.
LOCK Indicator
LOCK display is displayed by pushing the LOCK
button. Push the LOCK button to clear display.
NOTE:
!LLSIGNSSHOWNINTHE&IGISFORTHEPURPOSEOFCLEARPRESENTATION
"UTDURINGTHEACTUALOPERATIONONLYTHERELATIVEFUNCTIONALSIGNSARESHOWN
ONTHEDISPLAYPANEL
Drying operation
Cooling/Heating/Fan only operation
NOTE:
$UETOTHEDIFFERENCEOFTHESETTEMPERATUREOFTHEUNITANDTHEACTUALINDOOR
TEMPERATURETHE!IR#ONDITIONERWHENIN$29MODEWILLAUTOMATICALLYOPERATE
MANYTIMESWITHOUTRUNNINGTHE#//,AND&!.MODE
Start
Ensure unit is plugged and power is available.
The OPERATION indicator on the display panel
of the indoor unit starts flashing.
1. Mode select button (MODE)
Press to select DRY.
2. Temperature button (TEMP)
Push the TEMP button to set the desired
temperature, the most comfortable temperature
is between 21°C to 28°C.
3. ON/OFF button
When the remote controller is off, push this
button to start the air conditioner. No fan speed
indicator displays .The Indoor fan speed will
be automatically selected LOW.
Stop
ON/OFF button
Push this button again to stop the air conditioner.
Note: The fan speed cannot be adjusted when
the unit is in AUTO and DRY mode.
Start
Ensure unit is plugged and power is available.
The OPERATION lamp on the display panel of
the indoor unit starts flashing.
1. Mode select button (MODE)
Press to select COOL, HEAT (Not applicable
to cooling only models), or FAN.
2. Temperature button (TEMP)
Set the desired temperature, the most
comfortable temperature is between 21°C to
28°C.
3. Fan speed button (FAN SPEED)
Press to select “AUTO”, “LOW”, “MED” and
“HIGH”.
4. ON/OFF button
When the remote controller is off, push this
button to start the air conditioner.
Stop
ON/OFF button
Push this button again to stop the air conditioner.
The FAN ONLY mode does not control temperature.
Therefore, perform only steps 1, 3, and 4 to
select this mode.
3
6
J265_EN.indd 5
12/7/05 3:43:35 PM
