14
HIGH WALL
YORK MINISPLIT HIGH WALL 035T79001-000 (EN)
Operation Procedure (continued)
SELECTING THE TEMPERATURE
Press TEMP buttons UP or DOWN to change the
temperature setting in the LCD operation display.
The temperature setting is shown in degrees
centigrade. A higher number indicates a higher
room temperature. A lower number indicates a
lower room temperature.
SLEEP FUNCTION
Press the SLEEP button to select the SLEEP
function. When the sleep function is activated the
air conditioner will be automatically turned OFF
after seven hours. If at the same time TIMER is
activated, as well, the air conditioner will be turned
ON and OFF according to the TIMER setting.
To cancel the SLEEP function press on one of the
following:
•
START/STOP button
•
SLEEP button
TIMER OPERATION
Press TIMER button to activate the timed
operation mode. Each time the TIMER button is
pressed, one of the following four types of
operation modes will appear on the LCD display.
The operation modes are sequenced in the
direction of arrow. TIMER indicator on the air
conditioner will light up during TIMER operation.
Note
After power failure when the unit is in timer mode TIMER
indicator will be blinking and the unit will be automatically
turned to stand-by mode and the timer operation will be
cancelled. To resume the timer wait 30 sec. before
reprogramming. Follow the instructions above.
˚C
— TEMP —
MODE
+
—
˚C
˚C
SET
CLEAR
TIMER
+
—
— TEMP —
MODE
+
—
˚C
˚C
SET
CLEAR
TIMER
+
—
˚C
— TEMP —
MODE
+
—
˚C
˚C
SET
CLEAR
TIMER
+
—
OFF
ON
˚C
SLEEP
button
Room
temperature
button
START/
STOP
button
TIMER
button
TIMER
SET
button
03_MHC/BOH 07-25.p65
18/3/02, 16:15
14