19
●
Drain Pipe Joint
Drain pipe joint is a drain connection device when using
outdoor unit chassis as a water tray.
Drain pipe connection components:
Name
Model
Drain pipe joint
DC-01Q
Model
Part Name
Material / Color
Quantity
Usage
DC-01Q
Drain pipe joint
PP / black
1
Connect the drain connection
Drain pipe cap
PP / black
1
Blocking the water pipe mouth
Rubber cap
CR / black
4
Sealed drain connection and drain cap
Installation location
For example, JVOH140VPEMBQ models:
Drain pipe
field supply
Chassis
Drain cap
Drain pipe
connection
Rear
Front
Drain cap position (2 places)
Drain pipe connection
position (2 places)
Side view
6. The Refrigerant Piping Construction
DANGER
!
●
Refrigerant R410A is used in the refrigerant circulation system. Do not allow oxygen, acetylene
or other flammable and toxic gases to fill the refrigerant pipe during leakage and air tightness
test. These gases are very dangerous and may cause an explosion. It is recommended to use
nitrogen.
●
Ensure that there is no pressure inside the stop valve when removing the cap on the stop
valve.
CAUTION
!
Make sure that the refrigerant piping is connected in the same refrigeration system.
6.1 Piping Material
(1) Prepare copper pipe for on-site construction.
(2) Follow the instructions in Table 6.1 and Table 6.2. Select the copper pipe specifications.
(3) Choose clean copper pipes. Make sure that there is no dust and moisture inside the copper pipe
inner wall. Before performing piping connection, use dry air or nitrogen to blow the inside of the
copper pipe to remove internal dust or impurities. Do not cut the copper pipe with tools such as
saws and grinding wheels that can produce metal debris.
