York CC10, Manual

Page: 10 / 12

YORK® SINGLE AND TWIN CENTRIFUGAL CABINET FANS, CC-SERIES
10
Model
CC = Single Unit
CCB = Dual Unit
Unit Size
10, 12, 15, 18
Motor Speed
1 = Single Speed
2 = 2S2W Single & Three Phase
3 = 2S1W Three Phase
Horse Power
See selection software.
Enclosure
O = Open Drip Proof
T = Totally Enclosed
Voltage
See selection software.
Phase
1 = Single
3 = Three
Cycle
5 = 50 Hz
6 = 60 Hz
Paint / Coating
0 = None
F = Epoxy Powder Coat*
G = Epoxy Powder Coat with UV*
H = Hi-Temp Powder Coat*
J = Non-stick Powder Coat*
K = Phenolic Powder Coat*
L = Phenolic Powder Coat with UV*
N = Polyester Powder Coat
X = Special
* Not available with choice of color.
Color
0 = None
50 = Chrome Green
55 = Pale Green
56 = Dove Gray
61 = White
63 = Oxford Beige
65 = Dover White
66 = Desert Tan
70 = Black
73 = Smoke Gray
77 = Brick Red
79 = Peppercorn
81 = Pale Brown
83 = Chocolate Brown
85 = Timeless Bronze
94 = Charcoal
X = Special
Damper
0 = None
D = Damper
Vibration Isolation
0 = None
RH = Rubber Hanger
SH = Spring Hanger
RF = Rubber Floor
SF = Spring Floor
SC = Support Channels with Rubber Floor
Insulation
0 = None
A = Insulation
Guard
0 = None
N = Inlet
U = Outlet
B = Both
Dust Filter
0 = None
F = Dust Filter
Filter Replacement Quantity
0 to 99
Disconnect Switch
0 = None
1 = NEMA 1 Disconnect Switch
3R = NEMA 3R Disconnect Switch
4 = NEMA 4 Disconnect Switch
Internal Wiring
0 = None
1 = NEMA 1 Internal Wiring
3R = NEMA 3R Internal Wiring
Thermal Overload Protection
0 = None
P = Thermal Protection
ENGINEERING SPECIFICATIONS
CC Units
Belt drive cabinet inline duct fan shall be
model CC, manufactured by YORK® by
Johnson Controls.
Fan housing shall be galvanized steel,
shall enclose the motor/fan assembly,
and include removable side panels to
allow access to the motor/fan assembly.
Fans shall have a forward curved
centrifugal wheel. Fan motors shall be
continuous duty, ball bearing design,
permanently lubricated, positively
cooled, and furnished at the specified
voltage, phase, and enclosure.
Each fan shall bear the AMCA Licensed
Ratings Seal for Air Performance and
shall be
C
UL
US
Listed.
CCB Units
Belt drive dual cabinet inline duct fan
shall be model CCB, manufactured by
YORK® by Johnson Controls.
Fan housing shall be galvanized
steel, shall enclose two motor/fan
assemblies, and include removable side
panels to allow access to the motor/
fan assemblies. Fans shall have a
forward curved centrifugal wheels. Fan
motors shall be continuous duty, ball
bearing design, permanently lubricated,
positively cooled, and furnished at the
specified voltage, phase, and enclosure.
Each fan shall bear the AMCA Licensed
Ratings Seal for Air Performance and
shall be
C
UL
US
Listed.