![background image](http://html1.mh-extra.com/html/york/buz024/buz024_installation-manual_3674595009.webp)
268723-BIM-C-0908
Johnson Controls Unitary Products
9
Figure 7: Typical Field Control Wiring Diagram
R
G
W
R
G
W
1
Y
Y
W
2
O
C
O
C
** = Minimum wire size of 18 AWG
wire should be used for all field
installed 24 volt wire.
* = Only required on units with
supplemental electric heat.
PROGRAMMABLE
THERMOSTAT ONLY
THERMOSTAT
UNIT CONTROL BOARD
TERMINAL STRIP
24 VOLT
TRANSFORMER
*
*
*
NOTE: HEAT ANTICIPATOR
SHOULD BE SET AT 0.25
AMPS FOR ALL MODELS.
CAUTION:
Label all wires prior to disconnection when servicing controls. Wiring errors cancause improper and
dangerous operation. Verify proper operation after servicing.