FORM 160.52-O1
17
YORK INTERNATIONAL
FIG. 10
KEYPAD PROGRAMMING DAILY
SCHEDULE SETPOINT
LD00959
To Enter
DAILY SCHEDULE
Setpoint:
(Refer to Fig. 10.)
1. Press and release
DAILY SCHEDULE
setpoint key.
The following prompt message is displayed:
SUN START = XX:XX AM, STOP = XX:XX AM
2. If the displayed start and stop time is not the desired
schedule, enter the desired start and stop times as
follows:
a. If you do not want the chiller to automatically start
and stop on this day, press
CANCEL
key.
b. Use the
Entry
keys to enter desired hours and
minutes start time.
c. If necessary, press the
AM/PM
key to change
AM to PM or vice versa.
d. Use the
Entry
keys to enter desired hours and
minutes stop time.
e. If necessary, press the
AM/PM
key to change
AM to PM or vice versa.
3. Press and release
ADVANCE DAY/SCROLL
key.
The following prompt message is displayed:
MON START = XX:XX AM, STOP = XX:XX AM
4. Enter the desired start and stop time per Step 2.
5. Press and release
ADVANCE DAY/SCROLL
key.
The following prompt message is displayed:
REPEAT MON SCHEDULE MON-FRI? YES = 1; NO = 0
a. If you press the
1 Entry
key, Mondays start and
stop time will be automatically entered for Tues-
day through Friday.
or
b. If you press the
0 Entry
key, Tuesday through
Friday can be programmed with different start and
stop times.
6. Use the
ADVANCE DAY / SCROLL
key with proce-
dure in Step 2. To enter start and stop times for re-
mainder of the week plus a holiday schedule if re-
quired.
7. Press the
ENTER
key.
PROGRAM MODE, SELECT SETPOINT
is displayed.