background image

HOW TO GET OFF THE TREADMILL

The following procedure has been proven to be the safest and easiest method of 

dismounting the treadmill.

For your protection, carefully read and follow these simple steps.
1. Turn treadmill to low speed. 
2. Firmly grip handles to support yourself.
3. Remove your trailing foot from the walking platform and place it on the foot pad on the 

    side of the treadmill. 

    This is very easy to do because the natural movement of walking will have shifted your 

    weight onto the foot that just stepped forward.
4. Shift your weight to the stationary foot on the foot pad, and remove the other foot from 

    the walking platform and place it on the other foot pad.  

    You should now be in the starting position.

5. Press STOP         key to stop the treadmill and disconnect the safety key then unplug treadmill 

    from the power outlet when finished.

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.

IN AN EMERGENCY

In a emergency take hold of the handrails and place your feet on the side rails provided,

once you are stable, pull out the safety key.  The treadmill will then begin to decelerate

until it stops.

YORK T520i TM / 11

HELP LINE (8:30am- 16:30pm)

U.K.

AUSTRALIA

YORK BARBELL (U.K.) LTD.

CHURCHILL WAY, DAVENTRY,

NORTHANTS, NN11 4YB ENGLAND

TEL: (01327) 701-824  
FAX: (01327) 706-704

E-MAIL: [email protected]

HELP LINE (8:00am- 16:00pm)

YORK BARBELL (AUST.) LTD.

UNIT 1, LOT 2, SWAFFHAM ROAD,

MINTO, N.S.W. 2566 AUSTRALIA

TEL: (02) 9603-8444
FAX: (02) 9603-8555

E-MAIL: [email protected]

F I T N E S S

F I T N E S S

STOP

STOP

Use a warm damp cloth with mild detergent to keep your YORK T520i treadmill clean.  

Do not clean between the mat and running board---The silicone lubricant is needed for 

smooth movement of the mat.

CARE AND MAINTENANCE

 

Pay particular attention to the fixing knobs and make sure they are tight.

If in doubt do not use the treadmill and contact our helpline.

Check parts for wear before use.

Always replace the mat if worn and any other defective parts.

TAKE CARE TO PROTECT CARPETS AND FLOOR in case of leakages.  This product is a

machine and contains moving parts which have been greased / lubricated and could leak.

TAKE CARE TO PROTECT CARPETS AND FLOOR 

WARNING: Stop Treadmill before Folding.

WARNING: Unplug the Power Cable before Maintenance.

U.S.A.

YORK BARBELL USA.

3300 BOARD ROAD.

YORK, PA 17402

TEL: +1-717-767-6481  
FAX: +1-717-764-0416

E-MAIL: [email protected]

HELP LINE (8:00am- 17:00pm)

F I T N E S S

Summary of Contents for T520i

































Reviews: