WE RECOMMEND YOU HAVE SOMEONE TO ASSIST YOU IN LIFTING AND
ASSEMBLING YOUR YORK T782 TREADMILL.
FOLLOW THESE INSTRUCTIONS CAREFULLY AND IT WILL MAKE IT EASIER
FOR YOU TO ASSEMBLE YOUR YORK T782 TREADMILL.
GENERAL
ASSEMBLY INSTRUCTIONS
1.
Ask someone to help you remove all the parts and packaging materials on the top of your
YORK T782
treadmill
from the carton and place them on the floor carefully.
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
*
*
2.
Fold the main frame up gently and stand it in the
carton base as shown.
Remove the handle bar posts and packaging
materials from the carton base and place them
on the floor carefully.
Ask s
base
omeone to help you hold the treadmill on
each side and lift it out from the carton
carefully.
o not lift the treadmill out of the
carton from the motor end as your
fingers may get squashed !!
Product may vary slightly from the item pictured.
3.
SENSOR
WIRE
SOCKET
MIDDLE
WIRE
PLUG
LEFT
HANDLE BAR
POST
Rest the left handle bar post beside the main frame
and close to the handle bar mounting bracket as
shown.
Connect the sensor wire socket to the middle wire plug
protruding from the base of the left handle bar post.
NOTE: TAKE CARE to ensure the wires are
connected as tightly as possible.
NOTE: TAKE CARE
YORK T782 TM / 04
MAIN
FRAME
CARTON
BASE
1.
2.
