SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
*
*
YORK T782 TM / 13
SPEED ADJUSTMENTS
There are three ways to adjust the speed during workout:
1. Pressing
FAST
and
SLOW
will adjust the speed by increments
of 0.1Km/H. Press and hold these buttons to speed up or down faster.
2. During the workout you can enter the speed using the number buttons.
If the speed adjustment increment is large, it is quicker and easier to
use the number buttons to adjust the speed.
3. Press the arrow up / arrow down keys on the right side of the
handlebars they will also adjust the speed by increments of 0.1Km/H.
For example, to change from 3 Km/H to 8 Km/H: Press the number
8
button once, or press and hold the FAST button or the arrow up key
until the speed display shows 8 Km/H.
ELEVATION ADJUSTMENTS
There are 2 ways to adjust the elevation:
1. Pressing the
UP
and
DOWN
buttons on the front of the console.
2. Pressing the arrow up / arrow down buttons on the left side of
the handlebars.
The buttons will adjust the elevation by increments of 1%.
In addition, the treadmill will automatically adjust it’s elevation during
the following two workout programs:
HRC by Elevation (8), and
Fitness Test (9).
The elevation may be adjusted while the running belt is not moving.
However, during the program setup mode, the elevation can not be
adjusted.
PULSE FUNCTION
This treadmill features wireless heart rate monitoring, the most advanced
technology to date for an accurate read out of your heart beat.
To use the wireless pulse monitoring system, you must wear the heart rate
transmitter chest strap so that the contact surface is next to your skin,
directly under your heart, to pick up the pulse signals from your heart.
Please note that some fibers used in clothes (e.g. polyester, polyamide)
create static electricity which may prevent a reliable heart rate
measurement. Also note that mobile phones, televisions and other
electrical appliances form an electro-magnetic field around them, which
may also cause problems in heart rate measurement.
PAUSE FUNCTION
When the
STOP
button is pressed during a workout, the program is
suspended. The large display window will flash “
WORKOUT PAUSED
”.
After the running belt has come to a complete stop, the dot matrix display
window will count down from 2:59. During pause mode, only the
START
and
STOP
buttons will function.
If
START
is pressed within three minutes of the pause mode being
activated, the treadmill will bring the running mat movement back to the
speed at which the treadmill was running when it was paused. The
workout values will resume counting and the program continues where
it left off.
If
STOP
is pressed during the pause mode, the program will end.
After three minutes, if no button is pressed, the treadmill will
automatically end the workout program.
PAU
SE
PAU
SE
T
S O
P
T
S O
P
U
K
A
Q IC
ST R
T
U
K
A
Q IC
ST R
T
T
STAR
T
STAR
AUS
P
E
AUS
P
E
STO
P
STO
P
AUS
P
E
AUS
P
E
STO
P
STO
P
QUICK
STAR
T
QUICK
STAR
T
T
STAR
T
STAR
