BFE Warranty Policy – November 1
st
2013
1.
When purchased from an authorised BFE distributor the BFE warranty shall guarantee that all framework and components
of your product are free from faulty manufacture. All faulty framework and components will be repaired or replaced as set
out in this policy. All warranties in this policy apply to
INDOOR HOME/DOMESTIC USE ONLY.
2.
These warranties do not apply to products used in commercial use applications.
3.
Warranty
DOES NOT
cover normal wear & tear and excludes faults due to misuse, abuse, incorrect assembly or lack of
general maintenance.
4.
Warranty is applicable to products sold and placed within Australia only.
5.
IMPORTANT
. Most of BFE products are pretested and we have inspectors checking all products prior to shipment. The
number one reason for a fault is due to
INCORRECT ASSEMBLY.
If you do have problems please go back to the start and double check your assembly and pay special attention to all
WIRING
connections. If you have accidently cut or damaged the wiring please let us know and we will be happy to send you
a new set at no-charge.
If you have done this and are confident you have double checked your assembly and are still having problems please email
our service department at
including your best contact details ,proof of purchase, serial
number and a brief explanation of what is wrong.
Emailing is the quickest and most reliable way to get your service request processed. Once we have your details we will
either call or email you back with the next steps. The quickest way, once we determine the problem and send you a
replacement part, is that we can talk you through over the phone on how to fit it.
If it is deemed by our service tech that it is too difficult, we can arrange (where available) a service technician.
NOTE.
If we arrange for a service technician ( where applicable) and it is found that it is not a manufactures fault and
found to be an assembly issue , normal wear and tear, transport damage or misuse then there will be a call out fee of $140
depending on location. (Surcharge applies for non-metro areas)
WARRANTY TERMS
- Warranty commences from the date of purchase from the retail store. Warranty only applies to the original
purchaser and is NON transferable. Warranty is void if the serial number of the product has been removed or tampered with.
Warranty does not apply to defects, faults or failures due to:
(a)
Defects caused during assembly or failure to assemble to the assembly manual provided. Assembly errors include but are
not limited to damaged wiring harness, stripped crank arms and or pedals and bolts used in the wrong locations.
(b)
Lack of general maintenance and or failure to service or maintain the equipment in accordance with the user manual
specifications and recommendations.
(c)
Power Surges
. The computers, control boards and motors are very sensitive to power fluctuations. You must use a surge
protector on all items that plug into your mains power otherwise your electronics will not be covered by this warranty. You
can purchase these from numerous retailers or you can call us on 07 3272 7010 to get a price.
(d)
User negligence, abnormal or excessive use, misuse, abuse or transport damage.
(e)
Repairs, alterations or modifications by NON BFE authorised service technician.
(f)
Accident, fire, flood or malicious damage by third person.
(g)
Ordinary wear and tear.
(h)
Failure to keep the product in a clean, dry environment causing rust. You should wipe off any sweat and moisture after
each training session.
(i)
Any products sold or placed in an application or the incorrect environment that is not recommended by BFE or as not
stipulated in the owner’s manual such as a commercial / rental environment will void the warranty set forth by BFE
(j)
BFE recommends the use of a protective rubber floor mat. This reduces the incidence of dust and lint collection around the
motor, reduces noise & protects your floor. You can purchase this from your retailer or contact BFE directly at
18
