![background image](http://html1.mh-extra.com/html/york-fitness/fb300/fb300_owners-manual_3524075012.webp)
www.york ness.
c
om
13
FUNCTION
Descrip�on
SET
In the STOP mode, press to set target values for TIME, CALORIES and
DISTANCE.
MODE
Press to select func�ons. Press the bu�on and hold for two seconds
to reset all func�ons to zero, except ODOMETER.
Power On
LCD will display all segments, beep and enter SCAN mode.
If no signal is transmi�er to the monitor for 4 minutes, the monitor will enter stand-by mode.
Press any key to wake the console up.
1. When monitor powers on (or when you press and hold MODE key), LCD will display all
segments, beep and then enter SCAN mode.
.
2. When a signal is transmi�ed to the monitor, TIME, CALORIES, Distance will start to count up.
3. If no signal is transmi�ed to the monitor for 4 minutes, the monitor will enter stand-by
mode.
Trouble shoo�ng:
When display shows all 8’s, faded numbers, incomplete numbers or blank screen.
RESET
w
ww.yorkfitness.com.au
12
www.y
ss.
c
om
Key Func�on:
In the STOP mode, press the bu�on to reset the se�ng values to zero.
Stand-by mode:
Opera�on:
Reove the computer and check the wire that comes from the computer is properly
connected to the wire that comes from the upright.
Press the bu�on and hold for two seconds. The value will increase
automa�cally even if you are not holding the SET bu�on.
Press any bu�on to stop.
Press the bu�om and hold for two seconds to rest all finc�ons to zero,
except ODOMETER.
Check that the ba�eries are correctly posi�oned and are in proper contact with the
ba�ery springs.
The ba�eries in the computer may be dead. Remove and replace with new ba�eries.