York Fitness 7000 Series T-I, Owner'S Manual

Page: 11 / 28

www.yorkfitness.com www.yorkfitness.com 11
Final Check
Your treadmill is now assembled. Please make the following final
checks:
• Make sure all screws / bolts are tightened.
• Make sure the equipment is on a flat, level surface.
Power Up
• Plug one end of power cable into the treadmill as shown.
• Plug the other end into a suitable AC outlet
(220/240V, 50/60Hz).
• Switch the treadmill on using the on/off switch.
• Attach the safety key to the console.
Power Cord
Safety Switch
ON / OFF
NOTE: Before you run on the treadmill for the first time, allow the treadmill to run independently for 10 minutes.
Check the running mat is tightened correctly and runs smoothly. If you think the mat needs adjusting please see
“Care & Maintenance” section for more details.
Fold up
Simply lift the running deck to fold. Make sure you hear the
sound of the deck locking into position - this ensures the deck is
locked in place and will not fall back down.
Fold down
1. Whilst taking the weight of the deck with your hands, step
on the release pedal.
2. Still holding onto the deck, guide it slowly down to the floor.
NOTE: Make sure nothing is obstructing the deck as you lower it.
Release Pedal
Moving the treadmill
This treadmill features 2 non marking wheels to help manoeuvrability:
1.
Fold up the deck as explained above.
2. Stand in front of the treadmill, square on.
3. Put one hand on each of the handrails and tilt the treadmill towards you.
4. Use the handrails to push the treadmill to desired location.
NOTE: Before moving the treadmill, ensure the power cable is unplugged from the wall and the treadmill.
Operational instructions