PAGE 5
46/99
SECTION 3
Install one black cap in the top of Part 2220. Take the end of
Pt.2220 with only one hole and attach between Pts.2228 using
one 3/8" x 5" bolt and one 3/8" nyloc nut.
Attach Pt. 2220 to the back of Pt.2221 using two 3/8" x 3 1/2"
bolts and two x 3/8" nyloc nuts.
Now that you have assembled the unit you must align and
tighten everything.
Tighten the following: -
Parts
2225 and 22241
22241 and 2221
2228 and 2227
2225 and 2228
2228 and 2220
2220 and 2221
Attach the decal to Pt.2250 and the weight stickers to the
weights.
INSTRUCTIONS FOR USE
Locate Bag No.29 (Cables).
For installation of Cables see Drawing J.
We recommend that the cables be removed from the machine
when not in use.
Additional holes in Pt.2220 are provided for the attachment of
the York 1001 PEC DEC which is sold separately.
For safety reasons, when bench pressing, the rear legs of the
bench should be located on top of the base plate.
To use leg curl attachment, move bench toward weight stack,
attach cable B to cable D using an 'S' hook (E).
Attach other end of cable B to eyebolt on Pt.2202 using the
remaining 'S' hook. Pull bench away from weight stack until
cables are tight.
For safety reasons -
Remove the lat bar (Pt. 2240) after use or it can hit you on the
head when performing other exercises.
When using short pulley bar for rowing exercise keep toes clear
of weights.
To adjust angle of handlebars change position of rear pin to one
of the 6 holes available.
WARNING:
Wire cables wear. It is your responsibility to inspect daily and
replace when starting to fray. Write to the address opposite or
telephone our helpline for replacements.
Always use your gym on a flat level surface.
Always use your gym in adequate space e.g. at least 2ft. (60cm)
clearance each side.
Care and maintenance: Before every training session the
equipment should be inspected for loose, worn or missing parts.
To prevent injury, replace doubtful parts before resuming
usage of the equipment.
Upholstery: Use a warm damp cloth to keep clean.
Base Plate
Bench
(Rear Leg)
Selector
Pins (159)
Selector
Pin (160)
Description
BAG 29 (Cables)
Qty.
E
B = Short Cable
42"
1
C = Medium Cable
55 1/4"
1
D = Long Cable
134"
1
E = 'S' - Hooks
2
YORK BARBELL (U.K.) LTD.
CHURCHILL WAY, DAVENTRY,
NORTHANTS, NN11 4YB, ENGLAND
GENERAL ENQUIRIES
TEL: (01327) 701800
CUSTOMER SERVICE HELPLINE
TEL: (01327) 701824
FAX: (01327) 706704
E-MAIL: [email protected]
www.yorkfitnessworldwide.com
SHOULD YOU REQUIRE ASSISTANCE
REGARDING WORN, MISSING OR DEFECTIVE
PARTS PLEASE CONTACT OUR HELPLINE
WE WILL REQUIRE THE BATCH NUMBER
(LOCATED ON A STICKER, ON THE BACK OF
THE UPHOLSTERY).
IF PARTS ARE MISSING FROM THE BAG THEN
WE WILL ALSO REQUIRE THE INFORMATION
PRINTED ON THE BAG.