METHOD 2: AUTOMATIC PROGRAMMING OF LIMIT POSITIONS
5
1. In case of setting the limit positions, the upper or lower limit position can be corrected.
2. Longer than 2 minutes pause between series of button clicks during programming will cause device to switch off from
programming mode without saving any changes.
Automatic programming of limit positions should start from the upper limit position
9. Regulation limit positions
B. LOWER LIMIT POSITION:
REGULATION OF THE UPPER LIMIT POSITION:
REGULATION OF THE LOWER LIMIT POSITION:
Roller shutters will
make 2 short up/down
movements. Motor will
make several sounds.
Press
DOWN button.
We stop the motor
in the lower limit position.
Simultaneously
press and hold DOWN
and STOP buttons for
2 seconds to confirm
lower limit position.
Press and hold
UP button for 2 seconds.
When the roller shutter feels
resistance, it will stop and the
upper limit position will be set.
Then the motor will move in
the opposite direction.
When the roller shutters
reaches the lower limit
position, the motor will feel
resistance stop and set the
lower end position.
Simultaneously
press and hold UP and STOP
buttons for 5 seconds.
Motor will make
a sound. Roller shutter
will make short
up/down movements
Roller shutters will
make 2 short up/down
movements. Motor will
make several sounds.
The upper limit position has
been changed.
The lower limit position
has been changed.
We set the new
upper limit position.
Simultaneously press
and hold UP and STOP
buttons for 2 seconds
to confirm new upper
limit position.
Simultaneously press
and hold DOWN and STOP
buttons for 5 seconds.
Motor will make
a sound. Roller
shutter will make short
up/down movements.
Roller shutters will
make 2 short up/down
movements.Motor will
make several sounds.
We set the new
lower limit position.
Simultaneously press and hold
DOWN and STOP buttons for
2 seconds to confirm new
lower limit position.
The lower limit position
has been set.
Limit positions
have been set.