7. Changing motors direction
8. Programming another transmitter
9. Programming limit positions
10. Regulation limit positions
4
1. The limit positions are set automatically after the first cycle.
LIMIT POSITION OF THE OPEN CURTAIN:
1. After automatic setting of the limit positions, it is possible to adjust them manually.
2. The limit positions set manually must not be outside the range of the limit positions set automatically.
Press OPEN button
on the remote control.
Press OPEN button
on the remote control.
Press OPEN button
on the remote control.
Press CLOSE button
on the remote control.
The motor will stop the curtain
and set the limit position.
Set the curtain in the
new limit position.
Press programming button
P2 on the remote control.
The led diode
will flash once.
The led diode
will flash once.
The LED diode flashes 5 times -
the limit position has been
changed.
LIMIT POSITION OF THE CLOSE CURTAIN:
Press CLOSE button
on the remote control.
Press CLOSE button
on the remote control.
Set the curtain in the
new limit position.
Press
programming button
P2 on the remote control.
The led diode
will flash once.
The led diode
will flash once.
The LED diode flashes 5 times -
the limit position has been
changed.
The motor will stop the curtain
and set the limit position.
Press and hold the programming
button on the motor for 2
seconds. LED diode flash once.
Press
programming button
on the remote control.
LED diode flashes.
Press and hold the programming
button on the motor for 5
seconds. Release programming
button after the second flash
of the diode.
Press CLOSE button
on the remote control.
The LED diode flashes 5 times -
settings have been saved.
Press
programming button
on the remote control.
The LED diode flashes 5 times -
the transmitter has been
programmed.
5
5
5
5
