![background image](http://html1.mh-extra.com/html/yomani/ml/ml_owners-manual_3453080052.webp)
YOMANI ML/XR
OWNER
MANUAL
46
unrestricted
last updated 3 May 16
document release 2.2
ymn_cleaning.fm
Cleaning the card readers
The chip-card reader and the magstripe-card reader should be cleaned every two weeks
with a cleaning card.
•
chip-card reader: insert and remove the cleaning card several times, always with
the same side of the card
•
magstripe-card reader: pull the cleaning card several times through the reader,
always with the same side of the card
Figure 53. Cleaning the card readers
Contact your vendor for information about specific types of cleaning card, for example
“wet” cleaning cards from a specialised supplier such as
If you use dry cleaning cards, mark the used side of the card after each cleaning. The
card can be used one time per side, giving four cleanings with each card. See order list
for details.
Summary of Contents for ML
