unrestricted
17
ymn_installing.fm
document release 2.2
last updated 3 May 16
YOMANI ML/XR
OWNER
MANUAL
•
the keypad and the display are facing the customer
•
the terminal is at an appropriate height for the customer:
–
for people who will be sitting down to use the terminal, the height of a standard
table is appropriate
–
for people who will be standing up to use the terminal, the appropriate height
is between 90 and 120 centimeters
•
there is enough space (typically 10 cm on all sides) around the YOMANI, so that it
is easy to:
–
insert a chip card in the chip-card reader
–
swipe a magstripe card with the magstripe-card reader
–
tap a contactless device on to the landing zone
–
open the cover of the printer and replace the paper
–
reach the reset button
•
direct light sources do not make it difficult to read the display or the keypad
Cables
Make sure that cables are positioned so that they:
•
allow for the necessary movement of the terminal
•
do not get in the way of you or your customers
•
are tie-wrapped together, as explained under “Tie-wrapping and attaching cables”
on page
[xref]
Keep the cables neatly tied together by guiding them through:
•
a hole in the surface which the YOMANI is placed on
•
the opening at the back of the YOMANI
!
Summary of Contents for ML
