14
Install the Water Depth Sensor (main assembly)
Determine how you will mount the sensor to the
wall or surface, and have hardware and anchors
appropriate for the wall surface on hand.
The sensor is intended to be wall-mounted,
using screws. It can be placed in another
enclosure. If using alternative methods, such as
mounting tape, ensure the sensor is securely
installed, so as to not fall off the wall later
(physical damage is not covered by the
warranty).
1.
Holding the sensor in position, mark the
location of the sensor’s four mounting holes to
the wall surface.
2.
If using anchors, install them, per the
manufacturer’s instructions.
3.
Insert and tighten one screw in each of the
sensor’s mounting holes, ensuring the sensor is
secured to the wall or mounting surface.
Installation, Continued
I