About YoLink Control
YoLink Control is our unique device-to-device control technology. Using YoLink Control, YoLink
devices can be controlled without the Hub or an internet connec on. (Use of YoLink Control is
op onal; you can use the Automa on feature in the app OR use YoLink Control, but YoLink
Control offers the benefit of opera on without the Hub or internet connec on.)
One device controls another, directly. A device that sends out commands is called the controller. A
device that receives the commands is called the responder. Examples of a controller are a Door
Sensor or Water Leak Sensor, while examples of a responder are a Siren or a YoLink Plug Mini
To configure your Garage Door Sensor 2 as a controller, turn the sensor into opened status
(verify the door is opened). Press and hold the SET bu on for 5-10 seconds un l the LED
quickly blinks green
Upon pairing, the LED will stop blinking (this may happen a er only blinking two or three mes)
To configure a
as the responder
n on the plug using
YoLink Plug Mini
. Tur
POWER bu on or
via YoLink app
Mini
(verify the Status LED of YoLink Plug
displays blue). Press and hold the
POWER bu on for 5-10 seconds un l the LED quickly blinks blue
Pairing
The Garage Door Sensor 2 can only work as the controller of YoLink Control, while the Garage Door
Controller does NOT support YoLink Control
29
