background image

7

Metric system indicator interface

Imperial system indicator interface

Fig. 7-4 Metric/imperial System Setting Interface

7.5 Speed sensor setting

P5 refers to the speed sensor setting option, which can be set according to the number of magnetic heads installed on

the wheels of your e-bike. The setting range is 1-63. Press the button

to enter the parameter modification interface.

Press the button

/

for parameter selection. Press the button

to save the parameter and return to the selection

interface of general setting options.

Fig. 7-5 Speed Sensor Setting Interface

7.6 Current limit setting

P6 refers to current limit setting. The adjustable range is 1-25A. Press the button

to enter the parameter

modification interface. Press the button

/

for parameter selection. Press the button

to save the parameter and

return to the selection interface of general setting options.

Fig. 7-6 Current Limit Setting Interface

7.7 Assistance sensor setting

P7 refers to the assistance sensor setting option, where the number of steel magnets of the assistance magnetic disk can

be set. The adjustable range is 5, 6, 7, 8, 9, 10 and 12. Press the button

to enter the parameter modification interface.

Press the button

/

for parameter selection. Press the button

to save the parameter and return to the selection

interface of general setting options.

Summary of Contents for YL81C-B













Reviews: