background image

4

Fig. 5-3 Headlight-on Indicator Interface

5.5 Assist level selection

By pressing the button

/

, the e-bike assist level will be switched to change the motor output power. The assist

levels available for the display include: levels 0-3, levels 1-3, levels 0-5, levels 1-5, levels 0-7, levels 1-7, levels 0-9 and
levels 1-9.

Fig. 5-4 Assist Level Switching Interface

5.6 Battery level indicator

The battery level indicator consists of five segments. When the battery is fully charged, the five segments will be all on.

In case of undervoltage, the outline of the battery indicator will flash, which means the battery has to be charged
immediately.

Full battery level

indication

4-segment
indication

3-segment
indication

2-segment
indication

1-segment
indication

Undervoltage

flashing

Fig. 5-5 Battery Level Indicator Interface

5.7 Error code indicator

When a fault occurs in the electronic control system of your e-bike, the display will automatically indicate the error

code in the distance area in the format of E0**. Detailed definitions of error codes are shown in

Schedule 1

.

Fig. 5-6 Error Code Indicator Interface

When an error code appears on the display interface, please conduct troubleshooting in time. Otherwise, your

e-bike will not work normally.

Summary of Contents for YL81C-B













Reviews: