Changing door opening direction.
To change the door opening direction:
1. Take all the products out of the appliance
2. Gently place the device in a horizontal position - with the door facing up
3. Unscrew the lower door hinge and the base on the opposite side. Then pull the appliance door downwards.
4. Unscrew the top door hinge and screw it in on the opposite side of the appliance under the control panel strip.
5. Unscrew the mask from under the display panel strip and screw it in on the opposite side.
6. Pry and remove three mounting hole plugs at the top edge of the door.
7. Unscrew the door handle and screw it in on the opposite side of its upper edge.
8. Put the mounting plugs in the remaining holes in the upper edge of the door.
9. Slide the door into the top hinge
10. Screw on the bottom door hinge and the base
11. Place the device in an upright position
12. Check that the appliance door closes smoothly. If you encounter any resistance, check if the bottom Hinge is not bent or over tightened.
Attention! Wait 6 hours before restarting the device.
