YOKOMO LTD. 4385-2 Yatabe, Tsukuba City, Ibaraki Prefecture, 305-0861.JAPAN
TEL +8129-896-3888 FAX +8129-896-3889
URL http://www.teamyokomo.com mail : [email protected]
2021.03
Setting mode (Red)
Mode LED
Number of blinks
Setting mode (red)
Select Mode Parameter
Red
●
Reverse power
OFF LO MI HI
Red
●●
Start power
Proportional from low speed to high speed
Red
●●●
Drag brake
Proportional from low speed to high speed
Red
●●●●
Battery type
Auto Ni-cd／Ni-MH Li-Po Li-Fe
LED display: [Red] Selection of setting mode [Yellow] Selection of mode parameters
Detailed settings: ( ● number of blinks ● = 1 time ●● = 2 times ●●● = 3 times ●●●● = 4 times)
Mode Parameter (Yellow)
●
●●
●●●
●●●●
Reverse Power
OFF
LO
MI
HI
Start Power
Standard
LO
MI
HI
Drag Brake
OFF
LO
MI
HI
Battery Type
AUTO
Ni-cd / Ni-MH
Li-Po 7.4V
Li-Fe
Hold down the set button and turn
on the ESC.
P r e s s t h e s e t b u t t o n a g a i n
momentarily.
If the red LED blinks twice, it will
be in the second set mode.
Available to select up to fourth set
mode.
The above instructed LEDs are built into ESC. The other LEDs installed in ESC only lights up in red.
Release the set button as soon
as hearing the sound three times.
W h e n t h e L E D t u r n s r e d a n d
blinking, it is in first set mode.
(Reverse power)
Hold down the set button and release when hearing a short and long sound. When the
LED color changes from yellow to red, select the mode parameters. (Reverse power)
Press the set button for at least a second until hearing a short and long sound,
and when hearing a sound, ESC setting is completed and are ready to use.
Hold down the set button and release when hearing a short and long sound. When the LED
color changes from yellow to red, and select the mode parameters. (Start power)
Press the set button for at least 1 second until hearing a short and long sound,
and when hearing the sound, the ESC setting is complete and are ready to use.
■ ESC Setting
●
OFF
▼
Press the set
button once
▼
●●
LO
▼
Press the set
button again
▼
●●●
MI
▼
Press the set
button again
▼
●●●●
HI
▼
▼
▼
▼
●
▼
Press the set
button once
▼
●●
2
▼
Press the set
button again
▼
●●●
3
▼
Press the set
button again
▼
●●●●
4
▼
▼
▼
▼
Selection of Mode Parameters
Selection of Mode Parameters
Mode selection
Standard
※ For experts
※＝ default value
※
※
※
※
