- 7 -
4
Firmly hold the gas body
④
and slowly pull out the gas nozzle
⑥
of the gas
pipe
⑦
.
5
Remove the union or flange of the air pipe.
6
Loosen the hexagon nuts setting the burner
plate
B
and the air body
③
.
7
Remove the air body
③
, and remove the air nozzle
⑤
set in the burner plate
B
.
8
In replacing the gas nozzle
⑥
by a new gas nozzle, remove the old gas nozzle
⑥
by applying a pipe wrench to the gas pipe
⑦
and a monkey wrench to the
gas nozzle
⑥
.
9
Inspect the inner surface of the burner tiles.
If the burner tiles are damaged, as it
may often affect combustion, contact us for instructions.
10 Reassemble the burner by reversing the order of the above steps.
※
Inspect and clean the burner and its accessories from time to time according to the
operational conditions.
7. Warning Plate
When the installation construction has been completed, check to confirm that the
warning plate shown below is firmly attached to the burner body.
If the warning
plate is lost, immediately contact our sales department for instructions.