YOKOGAWA YS80 Series, User Manual

Page: 17 / 42

5-1
IM 01B04N01-02E
Setting
1
2
3
App
1
2
3
5
6
7
8
4
Setting

Items to Confirm before Start of Operation
Before you start operation, inspect and confirm the following items:
(1) Draw out the internal unit from the rack case, and make sure that the specified fuses are
properly mounted in the fuse holders at the rear of the internal unit.
(2) When inserting the internal unit into the rack case, firmly connect the multi-pin connectors
for connecting the internal unit and the case.
(3) Make sure that power plugs are properly connected to the power outlet.
(4) Make sure that external wiring to the terminal block is properly connected.
The SISD isolator is made for operation by simply turning on the power once the installation
and wiring are completed. The isolator does not require parameter settings and the like if
there is no change in the specifications at order.
Chapter 5 Setting