IM 61A YHC1-E-A
3rd Edition: May 2008
Page 19 of 34
The editing function allows review of all HART parameters in a config-
uration and modification of editable parameters. The edit function can be
locked out if desired (see the
Lockout
section of this manual for more
information). To view detailed information of a stored configuration, move
the cursor to the desired tag number and press the Select soft key. The
Config Detail screen (see example at right) provides information to help
the user confirm the identity, origin, and save date/time of the configuration.
Pressing Select again opens the configuration for review or offline editing.
New configurations saved are added to the bottom of the List / Edit Config
list. If multiple entries for one device are shown, the most recently saved
configuration is always shown at the bottom.
Entries in the List / Edit Config list may have been saved or created from
various sources. Possible sources include the save command from a
connected HART device, created in the YHC using the
Create Configs
function, copied from another
configuration and renamed, or created by editing an existing file. The YHC will also list configurations
downloaded from the separately available Device Management System software from Yokogawa. Please
contact us for more information. Tag numbers, date / time of save, type of configuration stored, and other
information are displayed under
List/Edit Configs
. Configuration types are:
Complete Config = saved from connected device in Online mode, or a
complete config that was downloaded from DMS
Default Config
= created by YHC in Offline mode, or created in DMS
and downloaded to YHC
Edit Vars Only
= created by editing an existing configuration and includes only the edited parameters
MVar Primary Cfg = for multivariable devices – Primary Variable configuration
MVar Sub Config = for multivariable devices – Sub-configuration (secondary, tertiary, fourth, etc
variables)
3 Create Configs:
The
Create Configs
function allows the user to configure a HART device file in Offline Mode for sending
to the intended device later when connected in the Online Mode. Use the soft key controls to move through
the list and select the device model number required. The menus prompt the user to make the necessary
configuration selections, tag the file for later retrieval and use, and edit configuration lines as required. This
function can be locked out. See the Lockout Section of this manual for more information.
4 Delete All Configs:
The
Delete All Configs
function clears
all
configurations from memory (including active and hidden
configs). When this menu option is selected, the YHC will ask “Delete ALL Configs… ARE YOU
SURE???” Select
Yes
to clear
all
stored configurations from memory.
Delete Individual Configs / Clearing Configuration Memory:
Individual stored Configurations may be deleted with YHC
Del
soft key
function (see example at right). When this menu option is selected, the YHC
will ask “Delete CURRENT Config… ARE YOU SURE???” Select
Yes
to
clear only the selected configuration from memory.
The
Del
key only hides the record from the YHC screen; it does not clear
memory space. This function can be locked out. See the Lockout Section of
this manual for more information.
Online Setup Mode
Offline List / Edit
Configs Detail Screen
Offline
#
List/Edit Configs
Tag: PT-105A
Device ID 1365
PV: Pressure
Yokogawa
EJX
Complete Config
Uses DOF 37510103
51 Variables
12/18/07 4:58 PM
Copy Del Select Back
Offline List / Edit
Configs Detail Screen
Offline
#
List/Edit Configs
Tag: PT-105A
Device ID 1365
PV: Pressure
Yokogawa
EJX
Complete Config
Uses DOF 37510103
51 Variables
12/18/07 4:58 PM
Copy Del Select Back
