7-14
IM 703155-01E
Indicates the directory of the file shown. The display here does not change even if
you change the directory to be shown.
To move to a higher level directory, select here and then press the SELECT
key twice quickly.
If you select compact/ and press the SELECT key twice
quickly, the data on the CF card is displayed.
List of files and directories in the directory
File list display area
Selection display
Displays the selected directory name.
In the case of the top directory of the
internal hard disk, a slash (/) is
displayed. In the case of the CF card,
/compact is displayed.
Entry box
Displays the directory or file name
selected using the rotary knob. You
can also enter the file name.
Explanation
You can save the sequence list to the VB8300 internal hard disk, CF card, or USB
memory. The sequence list applies to one output terminal set.
Sequence List Format That Can Be Saved
The sequence list in the following formats can be saved.
Binary data (.seq extension)
ASCII data (.csv extension)
• When saving a sequence list, attach a .seq or .csv extension. If you omit the
extension, the .seq extension is automatically added.
• The sequence list can also be saved from the FILE menu (see section 10.3).
File Name
The number of characters and the type of characters that can be used are as follows:
Number of characters: Up to 255 characters.
Characters that can be used: 0-9, A-Z, a-z, -, and .
(A period cannot be used as the first character of a file name.)
Data Size
Approx. 69 KB maximum
Condition: When the file names of all elements including the directories are 510
characters long
7.3 Saving the Sequence List
