7-2
IM 703155-01E
Indicates the directory of the file shown. The display here does not change even if
you change the directory to be shown.
To move to a higher level directory, select here and then press the SELECT
key twice quickly.
If you select compact/ and press the SELECT key twice
quickly, the data on the CF card is displayed.
List of files and directories in the directory
File list display area
Selection display
Displays the selected directory name.
In the case of the top directory of the
internal hard disk, a slash (/) is
displayed. In the case of the CF card,
/compact is displayed.
Entry box
Displays the directory or file name
selected using the rotary knob. You
can also enter the file name.
Explanation
Before carrying out the procedures in this section, the waveform data of the sequence
list must be stored in the same folder as the sequence list. For the procedure of
creating/saving sequence lists, see section 7.2 or 7.3.
The sequence list data must be loaded for each output terminal set (OUT1 to OUT4).
Display example when a sequence list is loaded
For details on the displayed contents, see section 7.2.)
Loadable Sequence List Format
The sequence list in the following formats can be loaded.
Binary data (.seq extension)
ASCII data (.csv extension)
7.1 Loading the Sequence List
